So yeah it splashes up through the drain holes - it's concentrated right over where the Lift jacks the frame up in the mechanic station.
Anyway I didn't inspect more of the internal frame because I don't want to run out of newspaper - I used up what newspaper I have - to protect the garage floor.
So I sprayed the gel inside - hopefully that will do better than my attempt to do the pump sprayer with the Kleanstrip.
I guess I just need to try that again to make sure I get better coverage.
Yeah I better get baking soda on the garage floor - just to make sure.
So the OTHER side of the truck frame - where the lift goes up - is also rusted - confirming it is from the LIFT that caused the rust by scraping off the paint.
OK so if the GEL doesn't work as it's only 25% to 50% - but it just sits there horizontally - so it should work. But if it does not REACH the area - then when I get the "food grade" gallon that I ordered - that is 80% phosphoric acid. So it should be way more effective to convert the internal frame rust.
I still have half a gallon left of the Kleanstrip phosphoric acid at 50% also - so I will try another run of that when I get a chance.
VHT Flame Proof ceramic coating
I'm gonna paint this on the muffler and exhaust pipe!!
No comments:
Post a Comment