So in my previous blog post on qigong master John Chang - he lights up an LED bulb. It's only 20 milliamps or .02 amps
So then I also note that for the qigong master training then they have to light a 40 watt light bulb - but it's through 220 volts! So how many amps is that?
40/220=
.18 amps
So then what is the ohms resistance to light up a 40 watt bulb?
220/.18=
An incredible
1222 Ohms
What's the Ohms resistance on an LED bulb?
the LED resistance to be 3713 ohms.
So it is because of this huge Ohms resistance that people feel such a large shock from a qigong master.
But as I pointed out the LED bulb is based on quantum frequency and that is the real key secret.
That is why the scientists could not get a volt reading on the qigong master - the "negative" of the volts is stored internally deep in the body.
As we've noted - meridian studies have proven that the skin resistance is much greater than inside the body - and in AC power the huge resistance is called the Skin Effect.
So a qigong master is increasing the volts via quantum frequency - and so the internal energy more easily goes externally - with the skin effect reduced. The internal load is much greater and so can more easily overcome external "skin effect" AC resistance.
it finds some opposition for the flow of current in the regions closer to the centre of the conductor. Since this inductive reactance is stronger at the centre, the current tends to avoid that area and prefers flowing on the periphery or the skin of the conductor. Hence, skin effect. More the frequency, stronger is the reactance.So there is an inverse proportion of the human Skin Effect versus the external AC skin effect. A human has much stronger resistance on the skin while AC power has more stronger resistance in the core of the current.
https://www.cnet.com/news/appliance-science-how-led-lights-work/
The band gap is 1.67 eV, which corresponds to a wavelength of 743 nm.So how to convert the wavelength of the volt back into quantum frequency?
Thereforehttps://sciencing.com/frequency-led-lights-9592.html
λ = c/ν
λ = 3 x 108 m/sec/(5.38 x 1014 Hz)
λ = 5.576 x 10-7 m
1 nm = 10-9 m
λ = 557.6 nm
Answer:
The wavelength of the green light is 5.576 x 10-7 m or 557.6 nm.
Red LED devices produce light at a wavelength of approximately 633 nanometers (nm). The following equation is useful to find the frequency of a LED device:
Frequency = speed of light ÷ wavelength = (3 x 10^8) ÷ (633 x 10^-9)
The electromagnetic frequencies of light emitting diodes range from under 400 terahertz to over 600 terahertz, corresponding to red and blue light, respectively.
Carrying out this calculation leads to a frequency of 474 terahertz (THz),
Former Nichia scientist Shuji Nakamura invented Blue LED devices in 1993. These devices operate at a wavelength of approximately 470 nm, therefore:
Frequency = speed of light ÷ wavelength = (3 x 10^8 ) ÷ (470 x 10^-9)Completing the calculation leads to a frequency of approximately 638 THz.
The NIOSH states "Under dry conditions, the resistance offered by the human body may be as high as 100,000 Ohms. Wet or broken skin may drop the body's resistance to 1,000 Ohms," adding that "high-voltage electrical energy quickly breaks down human skin, reducing the human body's resistance to 500 Ohms."https://www.chegg.com/homework-help/questions-and-answers/average-resistivity-human-body-apart-surface-resistance-skin-51-ohm-middot-m-conducting-pa-q19427284
The average resistivity of the human body (apart from surface resistance of the skin) is about 5.1 Ohm middot m. The conducting path between the hands can be approximated as a cylinder 1.7 m long and 0.10 m in diameter. The skin resistance can be made negligible by soaking the hands in salt water. What is the resistance between the hands if the skin resistance is negligible? If skin resistance is negligible, what potential difference between the hands is needed for a lethal shock current of 100 mA? Your result shows that even small potential differences can produce dangerous currents when skin is damp.
photon energies (4 meV for 1 THz, one million times weaker than X-ray photons) and will not cause harmful photoionization.https://rifevideos.com/chapter%20_17_the_skin_effect_myth.html
"At frequencies between 300 and 3,000 MHz [300 million Hertz to 3,000 million Hertz], electromagnetic energy can penetrate into more deeply situated tissues, making it especially desirable for therapeutic applications."
http://people.seas.harvard.edu/~jones/cscie129/pages/health/
absorp.htm#frequency
Since the frequency range that Dr. Rife used did not even exceed 20 MHz (20 million Hertz) and this frequency range can and does "penetrate into more deeply situated tissues." This means their statement that "At frequencies above 1 MHz [1 million Hertz], skin effect will limit penetration to a fraction of an inch" is incorrect. It is actually frequencies that are below 1 MHz (1 million Hertz) that have difficulties penetrating human cells. This is the main reason why Dr. Rife used an RF Carrier frequency of 1 MHz or higher with these low audio frequencies. The importance of why Dr. Rife used an RF Carrier frequency will become apparent as we continue to discuss the topics of the "Skin Effect", “Body Impedance Analysis” and an "RF Carrier" frequency. Every quote we give will be backed up with links to the supporting documents.
Designing thermoelectric generators for self-powered wearable electronics
Thermoelectric generators (TEGs) are of interest to make these wearables self-powered by making them rely entirely on the heat harvested from the human body. The challenge with using thermoelectrics on the human body is the large thermal resistances experienced at the skin/TEG and TEG/ambient interfaces. These parasitics can be potentially so large that they can dominate the device performance.
So 20 milliamps at AC current can paralyze the organs! video
So under 20 milliamps - the muscles respond - this explains the shock effect of the qigong master.
The higher the voltage is then the lower the skin resistance is!
So by creating very high frequency energy the qigong master is able to lower the skin resistance of people around them - to penetrate inside other people's bodies - to the center of their skull for example.
So a static energy shock is a few thousand volts and at 12 amps but it is very brief in time.
High-voltage electrical energy quickly breaks down human skin, reducing the human body’s resistance to 500 Ohms. Once the skin is punctured, the lowered resistance results in massive current flow
https://rifevideos.com/chapter%20_17_the_skin_effect_myth.html
So I have described before how when meditating more - I used to get a shock in the center of my brain when the propane furnace would kick on. why the center of my brain and not the skin? Because there is lower resistance in the center of my brain.
https://rimstar.org/sdprop/hamel/hameltheory.htmThe initial wobble of the magnets induces an electrical current in the metal cones and the exterior shell. This results in a separation of charge across the skin of the cone. Charge leaks out any sharp points, ionizing the air. The wobbling of the cones causes the ionized air to move around, including away from the sharp points, allowing more ionization. This ionized air fills the drum, including the area between the wobbling magnets located at the cone rims. This fulctuating magnetic field in the presence of ionized air results in a tapping of zero point energy. Somehow there is feedback which sustains the wobbling. If enough zero point energy is tapped then gravity effects may happen.
So just turn this upside and you get the secret of Full LOtus Padmasana Pyramid Power energy
David jumped out of bed and looked toward the attached garage. A red glow came from that direction through the French doors and lit the living room. From the bedroom, it did look as if the garage was on fire!
Inside the garage, he encountered a dismaying sight. His carefully-built device had exploded out of the drum and was scattered in pieces all over the room. Apparently the red glow had been from a buildup of energy of some type as the device operated. There was no fire, fortunately, but his investment of thousands of dollars in magnets was destroyed.https://rimstar.org/sdprop/hamel/hameltheory.htm
He would often speak of the zero point appearing at the center of a vortex. On one occasion we were in his kitchen and David was draining the sink and pointed to the resulting vortex in the water and said that was like the hole into the zero point. David often adopted terms from standard physics for his own use, where that use might be entirely different. This may or may not be the case here with the term "zero point". David also said that a red glow came from the direction of the garage when he was awakened by the explosion of this 45GD. Ionized air typically looks purple in color, which some may call red. Also, David did tell me "The cones are what make the invisible (air) become visible (the air becomes plasma)."
Just after David screwed the garbage-lid cap on one of his devices, the one which flew away, he ran into his house to get a camera as his wife Nora yelled out "The TV went out!" Another of David's devices caused double exposure on camera film, TV interference and cars to stop in the street. All these effects would likely be indications of tapping zero point energy. Tapping zero point energy may result in particle creation, e.g. electrons. This would further ionize the air.https://rifevideos.com/can_a_circuit_for_a_rife_machine_really_detect_resonant_frequencies_of_microorganisms.html
At the present time, all these circuits can do is give an unreliable galvanic skin response feedback from a stimulant frequency. This, of course, is not a true reading of a microorganism's resonant frequency. People need to understand they are being misled into purchasing machines with these circuits with the hope that they will somehow be able to determine the resonant frequency of some organisms that may be causing their health problems.
No comments:
Post a Comment