Thursday, February 25, 2021

Oh the Eastwood internal frame coating is BLACK - no wonder

 OK I was reviewing my Eastwood internal frame coating posts - I thought it was a WHITE color. oops. No it was black. So that explains why my internal frames are mainly black!! The coating seems to have really worked well. I would say it's about 80% black. 

I'll double check again tomorrow with the inspection camera.


JB Cold Welding a new Duct pipe tailgate?

 So I think this might work. My first "duct pipe" tail gate repair got torn off in the car wash!! Luckily the duct pipe did just come loose and not just fall out. So I think it must have caught rust - or the rust is just spreading fast. I have tried phosphoric acid repair and then painting over the rust but apparently the rust was spreading UNDER the paint.

So I just put on three pieces of duct pipe - I had gotten the wrong size before as stove pipe. Galvanized steel. So I just cut it into three pieces - one long piece and two smaller pieces on the edge. This time I just covered OVER the outside of the tailgate - as more holes appeared. I had a huge hole of missing tailgate from the rust.

So now it's all covered and I used three packages of "Original" JB Weld that is much stronger than the JB "kwik weld" - only this is a very slow cure especially in this colder weather. It will cure - the first cure was holding after 12 hours.

So now I'll wait till noon tomorrow and then I'll do Bondo OVER the metal - I've never done Bondo before. So I'll have to use a hair dryer to cure the Bondo as that I don't think - well I guess it can also cold cure but it hardens up fast in the cold. So I have it stored inside.

It should work if I mix it up inside.

Then I need to buy some white paint. And of course the rust will keep spreading on the tailgate but since it's spreading UNDER the paint - there is really not much I can do.

So the tailgate obviously gets the most salt from all the splash back. And I did no rust treatment on the car for its first ten years while we drove on a very salty gravel road. It was constantly treated with salt.

It's amazing that the tailgate has held up as long as it did.


I fixed the newly received RIDGID Micro CA-25 Inspection Camera

 Wow - luckily I had a broken mini-flashlight with a battery connection metal piece that fit into the MISSING metal connector for the battery pack that just arrived this morning for the RIDGID micro CA-25 Inspection Camera.

https://elixirfield.blogspot.com/2021/02/did-my-internal-frame-rust-conversion.html


 Luckily the inside does not look nearly as bad as the top image. In fact it's mainly all black and I did use paraffin wax that is orange. So I'm not sure I'm seeing rust but probably some rust.

So I used phosphoric acid and probably black paint - I actually can't remember - AFTER I did the Eastwood treatment I think I did black paint? Anyway it's mainly black inside the internal frame.

I tried taking photos of the inspection camera but they didn't really turn out. Let's see if one loads.

No - it really didn't turn out. You can connect a cord to a larger monitor but I think you lose resolution when the image increases based on an analog connection.

OK that's how it fits in the box. I got it HALF off new price - so I suppose the battery connection got lost - the little piece of metal - and someone sold it when it was not working - since they couldn't use it anymore? Anyway NOW it is working. haha.

I'm really surprised I fixed it - and I was just wondering how to get it back in the box. I forgot how it was placed in the carrying case. So glad I found this image.

OK...

https://elixirfield.blogspot.com/2020/05/restoring-trailblazer-chassis-internal.html

Let's see if my previous post gave the details of what I did.

OK what I can do is use a phosphoric acid treatment maybe to see if those orange spots can be converted to black. If they change color then I know they WERE rust spots and NOT paraffin wax. haha. 

I got the better 360 degree spray nozzle. Let's see if I give more details in a newer post.

https://elixirfield.blogspot.com/2020/05/the-eternal-iron-pillar-of-delhi-vs.html 

https://elixirfield.blogspot.com/2020/06/finally-got-reinforcement-plate-welded.html

https://elixirfield.blogspot.com/2020/06/cold-weld-is-considered-key-to-fix.html 

I think with that plate above - that will absorb stress and maintain strength - and with converting rust internally with phosphoric acid and Eastwood - then that should stop rust spreading. Also with the cosmoline.

 https://elixirfield.blogspot.com/2020/06/ordering-bulk-phosphoric-acid-as.html

https://elixirfield.blogspot.com/2020/05/the-gm-chevy-unpainted-undercarriage.html 

 https://elixirfield.blogspot.com/2020/06/a-smattering-and-sprinkling-of-spring.html

 I am waiting on the Cosmoline wax - RP-342 and the gallon of phosphoric acid.
I got the Eastman Internal Frame Spray and a separate better sprayer nozzle - to ensure covering the whole insides of the chassis frame.

So I guess I didn't post any more details on my blog! amazing.

 

 

 


Wednesday, February 24, 2021

It's FAIR trade "hemp oil" not FREE trade - Season 2, Episode 7 Cobra Kai belies the bourgeois brainwashing

 I had a restaurant boss that made that snafu once - at the Resource Center for the Americas - she kept calling the coffee FREE TRADE organic. haha. I didn't think people would make that SAME mistake 23 years later!! Wow!!

 

 


Asymmetric coherent lenses of Gravity: Sir Roger Penrose says matter is a positive focusing convex gravity lens of light: The Trapped Surface of the future

 every point in the Penrose diagram corresponds to a 2-dimensional sphere .

 Purely astigmatic lens is completely positive in one direction and negative in the other direction. And the curvature due to pure gravity is of that kind. So I could understand how the focusing of light rays behaved - from having this experience of doing physics at school. So that was useful to me...

So there not lenses now - a kind of lens that gravity - how it acts on light rays. And the purely positive focusing lens - convex lens which is positive focusing is what matter does.

Sir Roger Penrose


 https://www.einstein-online.info/en/spotlight/the-singularity-theorem/

new interview - youtube

As the matter falls inwards, you surround it, probably in the vacuum region, outside the matter as it collapses in, you can draw a sphere around it. It has this curious property that if you have an instantaneous flash of light on this sphere, that the light rays converge BOTH ways. On the convex.. on the concave side the light rays will converge and on the convex side the light rays will diverge. On this convergence on both sides is nothing wrong if it is locally but if it goes all the way around the sphere then I call this a Trapped Surface.

If you looked at the Future of that Region then you had a boundary that was compact - it closed in on itself and that was inconsistent with the initial surface being Non-compact. And I could develop a theorem.

 There wouldn't be a universe if they're weren't conscious beings in it because otherwise there would be no one to see it.

Understanding is Consciousness....You follow the Schroedinger Equation and suddenly it JUMPS. That's not following the Schroedringer Equation - that's called the "collapse of the wave function" - we need a theory of the collapse of the wave function....

Quantum computers do not "harness" the collapse of the wave function...I don't want them to claim to be conscious when they're not. That's all.

 noncommutative Klein-quartic = taiji=wuji

  to create a 3-holed torus by attaching the sides of this surface to each other.

https://math.ucr.edu/home/baez/klein.html 

  It's a 3-holed torus, but drawn in a way that emphasizes the tetrahedral symmetry lurking in this surface! You can see there are 56 triangles: 2 for each of the tetrahedron's 4 corners, and 8 for each of its 6 edges.

However, 12 is just half of 24, so there should be an extra 2-fold symmetry, besides the 12 rotational symmetries of the tetrahedron. And there is! It consists of twisting Klein's quartic inside out, like this:



More precisely, if you follow the four corners of the tetrahedron, you'll see that two come back to where they were, while the other two get switched. So, this symmetry acts as a reflection, or odd permutation, of the 4 corners. The rotations act as even permutations of the corners.

 If you look carefully, you'll see each corner of his tetrahedral gadget is made of a little triangular prism with one triangle facing out and one facing in: for example, the pink triangle staring you right in the face, or the light blue one on top. Since 4 × 2 = 8, there are 8 of these triangles. Abstractly, we can think of these as the 8 corners of a cube! They aren't really, but we can pretend. The way these 8 triangles come in pairs corresponds to how the vertices of a cube come in diagonally opposite pairs.

 You see, the cubes in the Klein quartic have an inherent handedness to them. You can go between the 8 triangles of a given cube by following certain driving directions, but these driving directions involve some left and right turns. If you follow the mirror-image driving directions with "left" and "right" switched, you'll get an anticube.

Apart from having the opposite handedness, anticubes are just like cubes

 Daoist Master Wang Liping is taught this SAME lesson by his Dragon Gate Daoist alchemy immortal masters - to think of the corner of a room as having two triangles opposite to each other.

Everything then goes through, and out the other side at decelerating speeds to open up the twin universe

 


 

 https://www.bu.edu/wcp/Papers/Scie/ScieStar.htm

 vid of a Klein Bottle made from Two Moebius strips

The surface of a ball is a two dimensional sphere. Imagine a two dimensional entity in that two dimensional surface. It can travel forwards and backwards, or right and left. But it can’t travel up or down because a two dimensional surface has no thickness. And while it is traveling no matter were it travels in the sphere it will never find and edge.

A torus (the surface of a doughnut) is another two dimensional surface that has no edge.

Both of these are two dimensional surfaces that are embedded in three dimensional space.

A Mobius strip is also a two dimensional surface embedded in three dimensional space. However, unlike the sphere or torus it has an edge.

You can think of a Klein bottle as a Mobius strip whose edge has bonded to itself. That is not easy to picture.

It might be easier to think of a Klein bottle in relation to a torus. A torus is a tube whose ends are joined. A Klein bottle is a tube whose ends are joined but first one end passes through the wall of the tube and travels in the tube to meet and join its other end.

In three dimensional space a Klein bottle is a two dimensional surface that passes through itself like a ghost through a wall.

 https://www.quora.com/Is-a-Klein-bottle-actually-just-a-3D-version-of-a-mobius-strip

Original Sin Psychic Yuan Qi Exorcism Lunar Blue Light Goddess of the Su...